Could Be A While!

Well, our house has been on the market since July and we haven't had much action. It's not just us. Local realtors say things have pretty much come to a halt. The only comfort is that Texas is doing better than most of the country. However, we are blessed to have no timetable, no pressing need to move, unlike those with job transfers, etc.

So in the meantime, I will continue to work away at my Orient Express coach. It's not like working on or operating a layout, to be sure, but under the current circumstances it's about all the model railroading I'll be able to do for a while. Besides, it's fun!

Yesterday I finished cutting out the windows for the inner layer of one car side...the "corridor side" of the car. I than begin adding small styrene strips (really small, around 1/16 inch wide) around the inside of the window openings on the outside layer. These will give the openings a finished look, ever so slightly rounded at the corners.

Thinking ahead, I've been considering roof material. The coach roof is quite round and if styren won't curve that much, I may have to use balsa which, when soaked in a vinegar/water mix, is easily curved. That's a trick my son-in-law Craig, who has scratchbuilt model aircraft, taught me.

Orient Express Coach Progress

At last, as promised, here are photos of work to date on my Orient Express coach. It's a 1930s-era coach and is very similar to the one used in the Murder On The Orient Express (1974) movie starring Albert Finney and a superb cast. I'm building it in S Scale, of course, using passenger trucks I had available that are actually close in appearance to the prototype. While this model will never run on my (future reassembled) layout because the coach is European, I hope it will be a nice bookshelf display piece.

I was, as mentioned previously, very fortunate to find detailed plans of the interior and exterior, as well as color photos. This model coach is on display, I understand, at a railroad museum in Mulhouse, France.

Now, for the photos. In order from the top...

Photo 1: This is a little hard to see in the photo, but I drew out the sides in pencil on a sheet of styrene. Each side was drawn twice to provide an outer and inner layer; acetate "glass" will be sandwiched between.

Photo 2, 3: The interior partitions. Materials include basswood, balsa, and cardstock.

Photo 4: The work so far. One side's windows have been cut out and the second layer of that side is in progress.