Packing Up, Part 1

This is the layout disassembly in progress, as explained below. Photos, from the top:

Photo 1: The rail was cut at section joints, wiring was disconnected from the control panel, rolled up and secured under each section. The sections were then unbolted from one another.

Photo 2: The turntable bridge, control disk and hardware were removed.

Photo 3: The control panel was unbolted for storage.

Photo 4: All track ends at section joints were encased in protective cardboard, as were the turnout Caboose Industries ground throws.

Photo 5: The layout sections just before the leg assemblies were unbolted prior to storage.